Ductile
Iron PIpe and Fitting
Ductile Iron Pipe
Ductile Iron Pipe with its low content of sulfur, phosphorus and low
anti-harmful element, adopts medium frequency new technology and has been first
choice for water, gas and oil transfer.
The main grades include T type joint from DN80mm to DN1200mm.
All ductile iron pipes manufactured in accordance with ISO2531/EN545 standards.
Inside ordinary cement mortar lining as per ISO4179 standards.
Outside metallic zinc coating (min. 130gsm) plus a finishing bitumen layer
(min.70μm) As per ISO8179 standards.
Standard:ISO2531:1998(E) EN545:2002
|
Ductile Iron Pipe Fitting:
DIP fittings are the mating products for DIP with the specifications of DN
100mm-DN 2600mm. The products are widely used in various DIP. They are widely
marketed in Taiwan, Malaysia, Australia, Sri Lanka, U.A.E, USA, etc. Pipe
fitting surface shall be smooth and free from sand holes, blow holes, distortion
or any other defects.They comply with BS EN 545/EN 598, ISO 2531 or BS
EN598standard.
Main Products:
Flange and Sockt Bend, Tee, Reducer
Flange pipe,Cross,Puddle pipe,Flage Spigot
Flange Adaptor,Coupling
Photoes of Main Products:
| |